--Variable mud pump The mud pump has a crank-connecting rod structure, a three-cylinder single-acting horizontal piston pump, and the piston is a lip-shaped self-sealing type. It is made of rubber or polytetrafluoroethylene and nylon protective pads. The pump uses a variable five-axis automobile gearbox. Each flow rate is equipped with an anti-seismic pressure gauge and necessary spare parts, disassembly and assembly tools, etc.
Mainly used for supplying flushing fluid in core and coal seam drilling or hole drilling in coalfield geology, metallurgical geology, and hydrogeological engineering. The flushing fluid can be a mud pump, clean water, coal water, etc. It can also be used as an infusion pump as above. . This mud pump has passed coal safety certification and can be used in coal mine underground operations.
Three-cylinder plunger mud pump specifications
Model
-
Cylinder liner inner diameter
Piston stroke
/>
Discharge pressure
.
Number of reciprocations
Suction pipe diameter
Drain pipe diameter
Motor model
-
-
Power
Speed
Quality
Dimensions
Model-
Type horizontal, Three-cylinder, single-acting reciprocating piston type
Flow rate (/)
Pressure. . .
Supporting power. (Special for coal mines)/(Not for coal mines)
Water absorption height
Inlet pipe diameter
Drainage pipe diameter
Overall dimensions
Weight
Mud pump is a special equipment for transporting mud, providing flushing fluid to boreholes and low-pressure infusion of cement slurry and cement mortar. . It is widely used in coal mine grouting waterproofing projects, hydropower grouting projects and other foundation treatment and reinforcement projects.
--Mud pump technical parameters:
Cylinder liner inner diameter
Piston stroke
Rated discharge pressure. .
Rated flow rate
Number of piston reciprocations
Suction pipe diameter
Drainage pipe diameter
Motor model-
Power
Quality
Overall dimensions
All mud pump models: (.～.)/ (~.)-, (.~.)/(~)-, (.~.)/(~.)-, (.~.)/(~.)-, (.~.)/(~) -Vertical three-cylinder plunger mud pump, (.~.)/(~.)-,.~./.~.-.~/.~.--Manual double-liquid grouting pump for coal mines,.~ ./.~-,~/~-,.~./.~.-Mud pump,~/~-,.~./.~.-Plunger mud pump,.~./.~.-, -~/~.-. ,.~./.~.-Three-cylinder mud pump
The two main parameters of mud pump performance are displacement and pressure. The displacement is calculated in terms of how many liters are discharged per minute. It is related to the diameter of the borehole and the required return speed of the flushing fluid from the bottom of the hole. That is, the larger the hole diameter, the greater the required displacement. The return speed of the flushing fluid is required to be able to flush the rock cuttings and rock powder cut by the drill bit away from the bottom of the hole in a timely manner and reliably carry them to the surface. When drilling geological cores, the upward return speed is generally around .~m/min. The pressure of the mud pump
depends on the depth of the borehole, the resistance of the channel through which the flushing fluid passes, and the properties of the flushing fluid being transported. The deeper the hole is drilled, the greater the resistance in the pipeline and the higher the pressure required.
Factory address: Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Inquiry phone:
Online:
3NBB15-12/4-5-22 variable mud pump